 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ST300CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 650 A FEATURES * Center amplifying gate * Metal case with ceramic insulator * International standard case TO-200AB (E-PUK) * Lead (Pb)-free * Designed and qualified for industrial level TO-200AB (E-PUK) RoHS COMPLIANT TYPICAL APPLICATIONS * DC motor controls * Controlled DC power supplies 650 A PRODUCT SUMMARY IT(AV) * AC controllers MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) TEST CONDITIONS VALUES 650 Ths 55 1290 IT(RMS) Ths 50 Hz ITSM 60 Hz 50 Hz 60 Hz VDRM/VRRM tq TJ Typical 25 8000 A 8380 320 292 400 to 2000 100 - 40 to 125 V s C kA2s UNITS A C A C I2 t ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 04 08 ST300C..C 12 16 18 20 VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V 400 800 1200 1600 1800 2000 VRSM, MAXIMUM NON-REPETITIVE IDRM/IRRM MAXIMUM PEAK VOLTAGE AT TJ = TJ MAXIMUM V mA 500 900 1300 1700 1900 2100 50 Document Number: 94403 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 ST300CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 650 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average on-state current at heatsink temperature Maximum RMS on-state current SYMBOL IT(AV) IT(RMS) TEST CONDITIONS 180 conduction, half sine wave double side (single side) cooled DC at 25 C heatsink temperature double side cooled t = 10 ms Maximum peak, one-cycle non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of on-state slope resistance High level value of on-state slope resistance Maximum on-state voltage Maximum holding current Typical latching current I2t VT(TO)1 VT(TO)2 rt1 rt2 VTM IH IL No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 650 (320) 55 (75) 1290 8000 8380 6730 Sinusoidal half wave, initial TJ = TJ maximum 7040 320 292 226 207 3200 0.97 0.98 0.74 0.73 2.18 600 1000 kA2s V kA2s A UNITS A C t = 0.1 to 10 ms, no voltage reapplied (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum Ipk = 1635 A, TJ = TJ maximum, tp = 10 ms sine pulse TJ = 25 C, anode supply 12 V resistive load m V mA SWITCHING PARAMETER Maximum non-repetitive rate of rise of turned-on current Typical delay time Typical turn-off time SYMBOL dI/dt td tq TEST CONDITIONS Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C ITM = 300 A, TJ = TJ maximum, dI/dt = 40 A/s, VR = 50 V, dV/dt = 20 V/s, gate 0 V 100 , tp = 500 s VALUES 1000 1.0 s 100 UNITS A/s BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage Maximum peak reverse and off-state leakage current SYMBOL dV/dt IRRM, IDRM TEST CONDITIONS TJ = TJ maximum linear to 80 % rated VDRM TJ = TJ maximum, rated VDRM/VRRM applied VALUES 500 50 UNITS V/s mA www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 94403 Revision: 11-Aug-08 ST300CPbF Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 650 A TRIGGERING PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage SYMBOL PGM PG(AV) IGM + VGM - VGM TEST CONDITIONS TJ = TJ maximum, tp 5 ms TJ = TJ maximum, f = 50 Hz, d% = 50 TJ = TJ maximum, tp 5 ms TJ = TJ maximum, tp 5 ms TJ = - 40 C DC gate current required to trigger IGT TJ = 25 C TJ = 125 C TJ = - 40 C DC gate voltage required to trigger VGT TJ = 25 C TJ = 125 C DC gate current not to trigger IGD TJ = TJ maximum DC gate voltage not to trigger VGD Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied Maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied 200 100 50 2.5 1.8 1.1 10.0 VALUES TYP. MAX. 10.0 2.0 3.0 20 5.0 200 3.0 mA V mA UNITS W A V 0.25 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum operating junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink SYMBOL TJ TStg RthJ-hs DC operation single side cooled DC operation double side cooled DC operation single side cooled DC operation double side cooled TEST CONDITIONS VALUES - 40 to 125 - 40 to 150 0.09 0.04 0.02 0.01 9800 (1000) 83 See dimensions - link at the end of datasheet N (kg) g K/W UNITS C Maximum thermal resistance, case to heatsink Mounting force, 10 % Approximate weight Case style RthC-hs TO-200AB (E-PUK) RthJ-hs CONDUCTION CONDUCTION ANGLE 180 120 90 60 30 SINUSOIDAL CONDUCTION SINGLE SIDE 0.010 0.012 0.015 0.022 0.036 DOUBLE SIDE 0.011 0.012 0.015 0.022 0.036 RECTANGULAR CONDUCTION SINGLE SIDE 0.007 0.012 0.016 0.023 0.036 DOUBLE SIDE 0.007 0.013 0.017 0.023 0.037 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note * The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC Document Number: 94403 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 ST300CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 650 A Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) 130 120 110 100 90 80 70 60 50 40 30 0 100 30 130 120 110 100 90 80 70 60 50 40 30 20 0 30 60 ST300C..C Series (Single Side Cooled) R thJ-hs (DC) = 0.09 K/W ST300C..C Series (Double Side Cooled) R thJ-hs (DC) = 0.04 K/W Conduction Angle Conduction Period 60 90 90 120 180 DC 120 180 200 300 400 500 200 400 600 800 1000 1200 1400 Average On-state Current (A) Average On-state Current (A) Fig. 1 - Current Ratings Characteristics Maximum Allowable Heatsink Temperature (C) Maximum Average On-state Power Loss (W) Fig. 4 - Current Ratings Characteristics 130 120 110 100 90 80 70 60 50 40 30 20 0 200 400 30 60 90 120 Conduction Period 1600 1400 1200 1000 800 600 400 200 0 0 ST300C..C Series (Single Side Cooled) R thJ-hs (DC) = 0.09 K/W 180 120 90 60 30 RMS Limit Conduction Angle 180 DC ST300C..C Series T J = 125 C 600 800 100 200 300 400 500 600 700 Average On-state Current (A) Average On-state Current (A) Fig. 2 - Current Ratings Characteristics Fig. 5 - On-State Power Loss Characteristics Maximum Allowable Heatsink Temperature (C) Maximum Average On-state Power Loss (W) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 1800 1600 1400 1200 1000 800 600 400 200 0 0 ST300C..C Series (Double Side Cooled) R thJ-hs (DC) = 0.04 K/W DC 180 120 90 60 30 RMS Limit Conduction Angle Conduction Period ST300C..C Series T J = 125 C 30 60 90 120 180 200 400 600 800 1000 200 400 600 800 1000 1200 Average On-state Current (A) Fig. 3 - Current Ratings Characteristics Average On-state Current (A) Fig. 6 - On-State Power Loss Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 94403 Revision: 11-Aug-08 ST300CPbF Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 650 A Peak Half Sine Wave On-state Current (A) 7000 6500 6000 5500 5000 4500 4000 3500 3000 1 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = 125 C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Peak Half Sine Wave On-state Current (A) 7500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial TJ = 125 C No Voltage Reapplied Rated VRRM Reapplied ST300C..C Series ST300C..C Series 10 100 3000 0.01 0.1 Pulse Train Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 10000 Instantaneous On-state Current (A) T = 25C J TJ = 125C 1000 ST300C..C Series 100 0 1 2 3 4 5 6 7 8 9 Instantaneous On-state Voltage (V) Fig. 9 - On-State Voltage Drop Characteristcs Transient Thermal Impedance Z thJ-hs (K/W) 0.1 Steady State Value R thJ-hs = 0.09 K/W (Single Side Cooled) R thJ-hs = 0.04 K/W (Double Side Cooled) (DC Operation) 0.01 ST300C..C Series 0.001 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Document Number: 94403 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 ST300CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 650 A 100 Instantaneous Gate Voltage (V) Rectangular gate pulse a) Recommended load line for rated di/dt : 20V, 10ohms; tr<=1 s b) Recommended load line for <=30% rated di/dt : 10V, 10ohms 10 tr<=1 s (1) PGM = 10W, (2) PGM = 20W, (3) PGM = 40W, (4) PGM = 60W, tp = 4ms tp = 2ms tp = 1ms tp = 0.66ms (a) (b) Tj=-40C Tj=25C Tj=125C 1 VGD IGD 0.1 0.001 0.01 (1) (2) (3) (4) Device: ST300C..C Series Frequency Limited by PG(AV) 0.1 1 Instantaneous Gate Current (A) Fig. 11 - Gate Characteristics 10 100 ORDERING INFORMATION TABLE Device code ST 1 1 2 3 4 5 6 7 30 2 - 0 3 C 4 20 5 C 6 1 7 8 PbF 9 Thyristor Essential part number 0 = Converter grade C = Ceramic PUK Voltage code x 100 = VRRM (see Voltage Ratings table) C = PUK case TO-200AB (E-PUK) 0 = Eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = Fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = Eyelet terminals (gate and auxiliary cathode soldered leads) 3 = Fast-on terminals (gate and auxiliary cathode soldered leads) 8 - Critical dV/dt: None = 500 V/s (standard value) L = 1000 V/s (special selection) 9 - Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95075 www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 94403 Revision: 11-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of ST300C20C1-PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |